Previous in Forum: FieldBus -Selection   Next in Forum: Nuclear Level Transmitter
Close
Close
Close
3 comments
Rate Comments: Nested
Commentator

Join Date: Nov 2008
Posts: 91

Gas Detectors Inside Control Room

12/13/2010 3:34 AM

when should we use gas detectors inside the onshore control room?

what is the standard that specify the usage of certain type of detectors(gas,fire .flame hydrogen,....etc) in different area of onshore gas plant?

Register to Reply
Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Member

Join Date: Oct 2010
Posts: 6
Good Answers: 1
#3
In reply to #1

Re: gas detectors inside control room

12/14/2010 11:07 AM

Solid state, diffusion adsorption-type detectors shall be used for continuous monitoring of hydrogen sulfide.

The need and specific location for fixed detectors shall be assessed on a case-by-case basis as per ISA RP92.0.02, ANSI/ISA RP12.13.02 (IEC 61779-6 Mod),

Register to Reply
Anonymous Poster
#2

Re: Gas Detectors Inside Control Room

12/14/2010 10:55 AM

Solid state, diffusion adsorption-type detectors shall be used for continuous monitoring of hydrogen sulfide.

The need and specific location for fixed detectors shall be assessed on a case-by-case basis as per ISA RP92.0.02, ANSI/ISA RP12.13.02 (IEC 61779-6 Mod),

Register to Reply
Register to Reply 3 comments

Previous in Forum: FieldBus -Selection   Next in Forum: Nuclear Level Transmitter

Advertisement