Previous in Forum: Cyclic Vibration b/t Two Motors   Next in Forum: Necessity of motor contactor with soft starters
Close
Close
Close
2 comments
Rate Comments: Nested
Commentator

Join Date: Dec 2006
Posts: 88

Specification on LV(400V) Surge arresters and Multi stage Capacitor Banks

05/16/2007 7:50 AM

Dear Sir,

Could some one Pl send me the relevant IEC, IEEE standards (including standard No.)on LV (400V) Surge arresters and Multi stage capacitor banks?

Register to Reply
Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Guru

Join Date: Oct 2006
Location: Surrey BC Canada
Posts: 1571
Good Answers: 42
#1

Re: Specification on LV(400V) Surge arresters and Multi stage Capacitor Banks

05/17/2007 1:39 AM

Rayvos references IEC Standard 61000-4-5

UL1414

UL1449

CSA - accessories and parts for Electronic Equipment.

IEEE charges for their standards, but a google search will usually point you to an abstract.

Register to Reply
Participant

Join Date: Aug 2007
Posts: 1
#2

Re: Specification on LV(400V) Surge arresters and Multi stage Capacitor Banks

08/08/2007 6:40 AM

Can I add for surge protection only the:

ANSI/IEEE C62.45 nd ANSI/IEEE C62.41.

If for Europe: The EN60950 and 61000-6-2

Just to mention I used with great satisfaction : MTL Instruments "Zone Defender PRO , that solved my past problems and suppressed all transiants...

www.mtl-surge.com

Good luck

Register to Reply
Register to Reply 2 comments

Previous in Forum: Cyclic Vibration b/t Two Motors   Next in Forum: Necessity of motor contactor with soft starters

Advertisement