Previous in Forum: List of obsolete or amalgamated companies   Next in Forum: CAT-5 hurricane strength wind screen
Close
Close
Close
7 comments
Rate Comments: Nested
Participant

Join Date: Sep 2007
Posts: 3

How to measure flowrate of stream water using ultrasonic transducers

09/12/2007 12:28 PM

HI can anyone say me how to measure the flowrate of a stream water using ultrasonic transducers.I want to use the cheap transducers and not an expensive ones.Any ideas.Thanks in advance.

Register to Reply
Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Guru
Popular Science - Weaponology - New Member United Kingdom - Member - New Member

Join Date: May 2007
Location: Harlow England
Posts: 16512
Good Answers: 670
#1

Re: How to measure flowrate of stream water using ultrasonic transducers

09/12/2007 1:32 PM

I'd have taught there were simple cheaper ways than ultrasonic.

Is this for continuous monitoring or what?

__________________
health warning: These posts may contain traces of nut.
Register to Reply
Participant

Join Date: Sep 2007
Posts: 3
#6
In reply to #1

Re: How to measure flowrate of stream water using ultrasonic transducers

09/21/2007 1:47 AM

It is a stream of water flowing in a river.And it is continuous monitoring.

Register to Reply
Guru

Join Date: Jul 2007
Location: UK, Midlands
Posts: 515
Good Answers: 2
#7
In reply to #6

Re: How to measure flowrate of stream water using ultrasonic transducers

09/21/2007 5:25 AM

Sure, I came across several product by some simple interent searching. Fine if you have the budget but not much good for our purposes. I think about the most economical was about 1000GBP which was portable. I'm sure you get highly accurate 'spot' measurements like this, but with the variation in flow rate around the section of a natural channel I imagine it becomes a challenge. I guess you can take an array of spot measurements to characterise the flow through the section and then one or two spot measurements might enable you to integrate out the flow across the whole thing with a fair degree of precision over small flow flutuations. River levels generally vary dramatically so your channel cross section is never constant. If you construct a weir with vertical sides there are formulae you can use to calculate flow from depth of water flowing over the weir. You could end up flooding quite an area this way though, placing any significant restriction in the flow.

__________________
Wish I was here more often.
Register to Reply
Guru
Engineering Fields - Control Engineering - New Member China - Member - New Member

Join Date: Sep 2006
Location: CHINA
Posts: 2945
Good Answers: 14
#2

Re: How to measure flowrate of stream water using ultrasonic transducers

09/12/2007 8:43 PM

One is Doppler principle. you can get the differnce of the two signal then calculate the flow speed.

Register to Reply
Guru
Popular Science - Weaponology - New Member United Kingdom - Member - New Member

Join Date: May 2007
Location: Harlow England
Posts: 16512
Good Answers: 670
#3

Re: How to measure flowrate of stream water using ultrasonic transducers

09/13/2007 2:44 AM

What do you mean by 'stream'?

1. Small brook, river, natural watercourse.

2. Even flow e.g. stream of urine?

What do we mean by 'what do we mean'?

Does my bum look big in this?

__________________
health warning: These posts may contain traces of nut.
Register to Reply
Guru

Join Date: Jul 2007
Location: UK, Midlands
Posts: 515
Good Answers: 2
#4
In reply to #3

Re: How to measure flowrate of stream water using ultrasonic transducers

09/13/2007 6:02 AM

Not that cat-bum fettish thing again?

I'm also interested. If mass produced there's no reason why an ultrasonic measuring system should be costly - look at the ubiquitous car parking sensors. More people ought to have streams, and it would increase the sales of sandbags - great for the economy!.

We did it to ways while 'surveying' for the hydro scheme. 1) stopwatch, and plastic bottle/stick/weed/w.h.y 2) Weir, plastic dustbin, stopwatch and swimming trunks.

Unfortunately on different days so can't give any indication of whether they agreed or not!

__________________
Wish I was here more often.
Register to Reply
Guru
Popular Science - Weaponology - New Member United Kingdom - Member - New Member

Join Date: May 2007
Location: Harlow England
Posts: 16512
Good Answers: 670
#5
In reply to #4

Re: How to measure flowrate of stream water using ultrasonic transducers

09/13/2007 8:54 AM

We did it to ways while 'surveying' for the hydro scheme. 1) stopwatch, and plastic bottle/stick/weed/w.h.y 2) Weir, plastic dustbin, stopwatch and swimming trunks.

That's just what I had in mind...quick, simple, fun & prob' more accurate.

Ultrasonics may give the velocity of just a small section of the flow.

__________________
health warning: These posts may contain traces of nut.
Register to Reply
Register to Reply 7 comments
Copy to Clipboard

Users who posted comments:

cnpower (1); user-deleted-1105 (3); Wrenched (2); Zakirmohd (1)

Previous in Forum: List of obsolete or amalgamated companies   Next in Forum: CAT-5 hurricane strength wind screen

Advertisement