Previous in Forum: Windows XP admin password   Next in Forum: Small Network Sharing
Close
Close
Close
2 comments
Rate Comments: Nested
Associate

Join Date: Jan 2007
Location: South Africa
Posts: 43

Driving an LCD using a PIC 16F84A

10/26/2007 3:46 PM

Hi to all the genius around the world.

I'm struggling to get a data sheet of a LCD MC1602C-SYL *W 5091 printed on the board PC-16021C4.

Please can you help me also how to make appear on this LCD a word for example as DANGER by using a PIC16F84A in assembler language using PI compiler that will generate a .IDT file.

Regards

__________________
Impossible n'est pas Camerounais
Register to Reply
Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Active Contributor

Join Date: Oct 2006
Location: San Diego, CA
Posts: 18
#1

Re: Driving an LCD using a PIC 16F84A

10/26/2007 11:27 PM

nganpet,

I would suggest purchasing a LCD display called the Hitachi HD44780A00.

google it or look to your nearest electronics shop. They are fairly cheap and inexpensive to work with. Once you have one, try these tutorials. The 2nd tutorial below discusses integrating this LCD with a PIC microprocessor.

try these tutorials

http://www.epemag.com/lcd1.pdf

http://www.epemag.com/lcd2.pdf

Good luck!

Register to Reply
Anonymous Poster
#2

Re: Driving an LCD using a PIC 16F84A

03/26/2008 11:03 PM

Do you still need LCD module?

I got plenty of them, also the tech spec.

Register to Reply
Register to Reply 2 comments

Previous in Forum: Windows XP admin password   Next in Forum: Small Network Sharing

Advertisement