Previous in Forum: Buffer Tank Sizing   Next in Forum: Pressure Vessel U Stamp
Close
Close
Close
2 comments
Rate Comments: Nested
Active Contributor

Join Date: Oct 2009
Location: Barranquilla, Colombia, South America
Posts: 14

Booster for Ammonia Cracked Gas

02/01/2010 8:43 AM

Gents:

I´m requiring a Booster for elevating the pressure of a dissociate ammonia gas (75 H2 & 25% N2) from 2.8 psi to the resultant pressure depending on Booster design, in a flow of 90 to 100 m3/hr, at 30°C. Please recommend me some manufacturer or the way to reach it. Thanksfullness to everyone.

Register to Reply
Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Anonymous Poster
#1

Re: Booster for Ammonia Cracked Gas

02/01/2010 10:50 PM

You have not identifed what the reultant pressure, which is an important factor in determining what booster will work for you. I may have a booster for you depending on the resultant pressure. You can contact me at glenn.schmidt@us.eagleburgmann.com.

Register to Reply
Guru

Join Date: Apr 2007
Location: Hyderabad, India
Posts: 596
Good Answers: 12
#2

Re: Booster for Ammonia Cracked Gas

02/02/2010 1:44 AM

I used 2HP Elgi (India) make resiprocating compressor to boost cracked ammonia to 6.2 bar pressure where it is sent in to Nitrogen generated from PSA to de-oxo (with peladium catalyst). My plant capacity 25NM^3/ Hr.

__________________
Subramanyam
Register to Reply
Register to Reply 2 comments

Previous in Forum: Buffer Tank Sizing   Next in Forum: Pressure Vessel U Stamp

Advertisement