Previous in Forum: Dial Test Indicator Cosine Error   Next in Forum: Welding on Vibrating Structures
Close
Close
Close
7 comments
Rate Comments: Nested
Member

Join Date: Feb 2011
Location: CHENNAI
Posts: 8

Mixer Grinder for Home Application

02/23/2011 1:51 AM

One of the reputed company Mixer Grinder is defective in design.The multipurpose Blade and the motor coupler is not having the proper contact within 15 days of use. The both coupler not engaed,the motor coupler freely rotating,results no grinding.What could be the cause?

Register to Reply
Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Guru
Technical Fields - Technical Writing - New Member Engineering Fields - Piping Design Engineering - New Member

Join Date: May 2009
Location: Richland, WA, USA
Posts: 21017
Good Answers: 795
#1

Re: Mixer Grinder for home application

02/23/2011 2:05 AM

Start by actually looking at it. Maybe it isn't even manually engaged all the way. Or maybe something jammed it and you can find a broken part.

__________________
In vino veritas; in cervisia carmen; in aqua E. coli.
Register to Reply
Member

Join Date: Feb 2011
Location: CHENNAI
Posts: 8
#5
In reply to #1

Re: Mixer Grinder for home application

02/28/2011 12:41 AM

Thanks for sugget.The motor coupler and blade coupler hv been changed.

Register to Reply
Guru
United States - Member - Member Engineering Fields - Electrical Engineering - Electrical Construction

Join Date: Apr 2010
Location: Mid Western USA - The Corn Belt
Posts: 1439
Good Answers: 58
#2

Re: Mixer Grinder for Home Application

02/23/2011 9:03 AM

Or try contacting the manufacturer or the place where you purchased it.

If all else fails, being that you have only had "15 days of use" you may want to try and get your money back and purchase a better unit.

__________________
The first 5 days after a weekend are always the hardest................................
Register to Reply
Guru
United Kingdom - Member - New Member

Join Date: Aug 2010
Location: Resting under the Major Oak
Posts: 4347
Good Answers: 181
#3

Re: Mixer Grinder for Home Application

02/24/2011 3:35 AM

If it was only 15 days old you should have taken it back to the retailer for replcement. I hope you haven't invalidated you guarantee by taking it apart

__________________
The reports of my death are greatly exaggerated.
Register to Reply
Member

Join Date: Feb 2011
Location: CHENNAI
Posts: 8
#6
In reply to #3

Re: Mixer Grinder for Home Application

02/28/2011 12:48 AM

Thanks for advise.Within guarantee the defets had been rectified. The coupler is mistake.basic desgin problem.I wonder Why the company is not approched the customers for replacement in defects.Name is PREETHI.

Register to Reply
Anonymous Poster
#4

Re: Mixer Grinder for Home Application

02/24/2011 11:20 AM

Hi Subu,

Personally, I have the Bullet Magic and the Ninja. Both perform daily for over 7 months without any trouble.

1) Your purchase, any brand, must immediately be returned to get a new and satisfactory tool for your home. You are the customer and customer is king!

2) Handling is important because the treads are thin.

Good luck, Gil.

Register to Reply
Member

Join Date: Feb 2011
Location: CHENNAI
Posts: 8
#7
In reply to #4

Re: Mixer Grinder for Home Application

02/28/2011 1:02 AM

Thanks, The Mixer name is PREETHI. I approched tro India times e mail as icare@indiatimes.co.in, but they respond that I have not purchased tro their shopping portal.Its too defficult for me to replace a new mixer & get the new mixer in India without cost implication.

Register to Reply
Register to Reply 7 comments
Copy to Clipboard

Users who posted comments:

Anonymous Poster (1); KJK/USA (1); sbalasubu (3); TonyS (1); Tornado (1)

Previous in Forum: Dial Test Indicator Cosine Error   Next in Forum: Welding on Vibrating Structures
You might be interested in: Grinder Pumps, Feed Screws and Mixer Screws, RF Mixers

Advertisement