Previous in Forum: Power Generator "Surging"   Next in Forum: Solenoid
Close
Close
Close
Rate Comments: Nested
Associate

Join Date: Sep 2010
Posts: 46

CDG 61 Relay

11/29/2010 1:07 PM

I have cdg 61 alstom o/c relay (inverse) for my 10 mva furnace transformer(ct ratio 600/5). full load current is 524 amps.plug setting is on 3.75 (.1 sec). tranformer get tripped on 495 amps.Now we want to increase the setting to 510 amps but next plug setting is is at 5.00.at what current the xr get trip.is it possible by increasing the time.let me know the function of inverse relay in detail and various possibilities of tripping.

Register to Reply
Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Anonymous Poster
#1

Re: CDG 61 Relay

11/30/2010 1:17 AM

Greetings,

When was the last time PM (preventive maintenance) service was performed on the transformer?

Could be any number of transformer related issues.

Your comment "transformer get tripped on 495 amps" indicates perhaps a dirty air filter or dirty/semi clogged injectors, bad fuel (stale)/water in fuel to name a few, if your are getting a "cloud of dark smoke' all the time and not just for a few seconds during start-up.

Perhaps now is the time to contact the manufacturers service rep to schedule PM service.

As far as "correct" words, your description was fine.

Here are a few other common descriptive words - When engine is running "stable" you can use the words "engine is running smooth" or in the case of "unstable" you can use "engine RPM is surging" or "engine is surging".

-copied As recieved

Register to Reply
Register to Reply

Previous in Forum: Power Generator "Surging"   Next in Forum: Solenoid

Advertisement