Previous in Forum: Flow Rate Through Ball Valve   Next in Forum: Can Support Directly Weld to Pressure Piping?
Close
Close
Close
5 comments
Rating: Comments: Nested
Participant

Join Date: Oct 2011
Posts: 2

Centrifugal Blowers

12/25/2012 11:52 PM

How I could finalise the design of a centrifugal blower of 18000m3/hour discharge and 100mm wg pressure using the theory or is there any ready reckoner for the same by books or software. shajan varghese from india-kerala

Register to Reply
Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Guru

Join Date: Oct 2007
Location: India
Posts: 1246
Good Answers: 34
#1

Re: centrifugal blowers

12/26/2012 4:02 AM

If you have to ask this question in a forum, you should be well advised not to attempt it in the first place.

Register to Reply Score 2 for Off Topic
Guru

Join Date: Oct 2008
Posts: 42355
Good Answers: 1693
#2

Re: Centrifugal Blowers

12/26/2012 12:58 PM

I'd use the theory.

What do you have so far?

Register to Reply
Commentator

Join Date: May 2012
Location: Sutter buttes - East 50 miles you found me
Posts: 59
Good Answers: 3
#3

Re: Centrifugal Blowers

12/26/2012 10:51 PM

Google ASHRAE fan laws

__________________
Lurking Always Lurking.........................in the Shadows
Register to Reply
Active Contributor

Join Date: Aug 2010
Location: Burbank, CA and Albany, NY
Posts: 10
Good Answers: 1
#4

Re: Centrifugal Blowers

12/27/2012 8:24 AM

Call Paxton, Republic or Sonic Air Systems. They all make a very nice single stage, high speed centrifugal blower. Why re-invent the wheel?

__________________
Marketing, Sales and Overall Strategic Planning for SMB industrial manufacturers.
Register to Reply
Power-User

Join Date: Feb 2010
Posts: 103
Good Answers: 2
#5

Re: Centrifugal Blowers

12/27/2012 11:50 AM

Google "centrigugal industrial fans" and you can find many manufacturers who can furnish you selection information on their line of fans providing you know the desired air quantity in cubic feet per minute or the metric equivalent plus the static pressure invovled.

Good luck

Lou Bindner

Register to Reply
Register to Reply 5 comments
Copy to Clipboard

Users who posted comments:

Altfeld (1); Joshi (1); Lou Bindner (1); lyn (1); The Shadow (1)

Previous in Forum: Flow Rate Through Ball Valve   Next in Forum: Can Support Directly Weld to Pressure Piping?

Advertisement