Wanted: Bevel Welding Technology Consultant

What country:

• Japan?
• Azerbaijan?
• Chile?

India. Importing materials from Germany and the same to bevel welded for power plants, specifically for Heavy Boilers.

Regards

This is T.C.Inc., a US technical consulting firm. We have on staff a certified welding instructor and inspector with over 30 years experience, willing to travel and can be deployed within the time frame of getting a visa and issuance of an L/C drawn on a US bank for an expected amount of the cost of the first months fees, travel and out of pocket costs. L/C to be replenished every 2 weeks to be drawn on based on submitted invoices.

The instructor will carry out training on site and will submit certificates of qualifications of your local welders. We assume you will provide a local independent inspection of welds.

Please contact our office at:

T.C.Inc.

26363 S. Tucker Rd.

Estacada, Oregon, USA 97023

Attn: President, Mr. T.J.Coyne, Jr.

Telephone: 001-503-630-6759

Please advise as to the location in India and details as to contact and travel.

Dear Sirs:

We thank you very much for reply.

We are in Chennai and works may be around 45kms from the city.

Please inform us your complete charges to enable us to proceed further.

Have a Nice Day!

with Best Regards,

For POWER TECH ASSOCIATES,

V.SIVA KUMAR.

Dear Mr. Kumar,

Thank you for the quick response. We are located in the US in Oregon State, I believe 12.5 hours difference from Chennai. Our welding consultant was on a project assignment in Mangalore during the mid 1990's so he is a bit familiar with India.

We would appreciate discussing further details of assignment and compensation via direct emails. Please contact T.C.Inc. at tcinc002@aol.com , attn: T.J.Coyne, with your email address.

As a side note, we normally work to US standards, depicted by ASTM. We can operate or interpret these to other standards if you wish. Please advise on which you prefer and you may have to provide us with a copy of the specific ones that apply to piping codes, pressure vessel codes, materials codes and applicable welding materials, etc.

Regards

T.J.Coyne-President

Dear Mr. Siv,

Further to above, we would like you to check our web site, " http://www.advance welding institute.com " and our tel nos. 91 44 658 55176, 2382 1812, and mobile no. 0 94440 55176.

thanks & regards,

Sridhar.

-------------------------------------------------------------------

Dear Mr. Siva Kumar,

With reference to your request, We at Advance Institute of Welding Technology, Chennai. Can help you in your project. With 30 years of experience in this field , we have trained more than 4,000 technicians, welders in SMAW, GTAW ( Plate & pipe 6G), GMAW, FCAW ,RSW, Brazing, Flash Butt etc., and familiar with various types of materials, including, CS, AS (incl. P91), SS, AL, CU etc. Around 1,200 Engineering Supervisors were trained in Arc Welding Technology and Welding Inspection, QA/QC, RT,UT,PT,MT - NDT Techniques, etc. in the last few years. These details are given to give an idea to you about us.

Our Institute is getting approval as Authorized Training Centre from AWS DNV, Ger- Lloyds. We also have Certified Inspectors (CWI) and IWE , Welding consultants / Inspectors and in a position to help you in your documentation of WPS, PQR and WPQ requirements if required.

Our mail id is: aiwt_training@yahoo.co.in, & sridhar305@yahoo.com. Think it is better to approach through e-mail and please send us the details at your earliest for further correspondences.

regards,

Sridhar

Dear Mr.Sridhar:

Thanks for your information.

We will get in touch with you son.

With Best Regards,

V.Sivakumar.

Dear Mr. Siva Kumar,

Thanks for your reply and looking forward to provide our services to you.

regards, sridhar ( AIWT-Chennai).

Dear Mr. SIV,

Give me your telephone nos, email address etc.

regards, Sridhar

Hi Sivakumar

P91 has been used in india for many years though you will have to import the consumables !! . Contact S A Vanchinathan at Madras City vanchi@vsnl.com and his number is 044 26633207

Cheers Cherian ( ex iit madras M Tech Welding 1973 now in dubai )