Previous in Forum: Electrical Circuit Contact Points & 'Gounding' Switch   Next in Forum: Antipumping
Close
Close
Close
13 comments
Rating: Comments: Nested
Active Contributor

Join Date: Oct 2011
Posts: 20

Parameters to be Considered While Selecting Panels

02/02/2012 12:20 AM

Please guide me what r the parameters to be considered while selecting

1) Any Main Power panel And Sub panels

2) What are the protective measures to be considered

3) please explain me regarding Reverse current protection and how we can protect our load from this.

Register to Reply
Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Guru

Join Date: Mar 2007
Location: by the beach in Florida
Posts: 33392
Good Answers: 1817
#1

Re: Parameters to be considered while selecting panels

02/02/2012 2:09 AM

These selections are all governed by code...

__________________
All living things seek to control their own destiny....this is the purpose of life
Register to Reply
Active Contributor

Join Date: Oct 2011
Posts: 20
#2
In reply to #1

Re: Parameters to be considered while selecting panels

02/02/2012 2:39 AM

where can i get that codes so that i can clear my doubts.

Register to Reply
Guru

Join Date: Mar 2007
Location: by the beach in Florida
Posts: 33392
Good Answers: 1817
#3
In reply to #2

Re: Parameters to be considered while selecting panels

02/02/2012 3:40 AM

What is your location?

__________________
All living things seek to control their own destiny....this is the purpose of life
Register to Reply
Active Contributor

Join Date: Oct 2011
Posts: 20
#4
In reply to #3

Re: Parameters to be considered while selecting panels

02/02/2012 4:06 AM

i am from India, Bangalore.

Register to Reply
Guru
United Kingdom - Member - Indeterminate Engineering Fields - Control Engineering - New Member

Join Date: Jan 2007
Location: In the bothy, 7 chains down the line from Dodman's Lane level crossing, in the nation formerly known as Great Britain. Kettle's on.
Posts: 32175
Good Answers: 839
#5

Re: Parameters to be considered while selecting panels

02/02/2012 4:49 AM

A1 & A2) Use the Indian equivalent of British Standard 7671 as part of it all.

A3) -

__________________
"Did you get my e-mail?" - "The biggest problem in communication is the illusion that it has taken place" - George Bernard Shaw, 1856
Register to Reply
Active Contributor

Join Date: Oct 2011
Posts: 20
#6
In reply to #5

Re: Parameters to be considered while selecting panels

02/02/2012 5:36 AM

If u dont mind sir, can you send me the link so that i can download that standards? because i dont have standards

Register to Reply
Guru
United Kingdom - Member - Indeterminate Engineering Fields - Control Engineering - New Member

Join Date: Jan 2007
Location: In the bothy, 7 chains down the line from Dodman's Lane level crossing, in the nation formerly known as Great Britain. Kettle's on.
Posts: 32175
Good Answers: 839
#7
In reply to #6

Re: Parameters to be considered while selecting panels

02/02/2012 8:03 AM

Google "British Standards".

__________________
"Did you get my e-mail?" - "The biggest problem in communication is the illusion that it has taken place" - George Bernard Shaw, 1856
Register to Reply
Guru
United Kingdom - Member - New Member

Join Date: Aug 2010
Location: Resting under the Major Oak
Posts: 4347
Good Answers: 181
#8
In reply to #7

Re: Parameters to be considered while selecting panels

02/02/2012 9:07 AM

BS7671 isn't available to down load. It's £80 to buy or £55 if you're a member of the Institute of Engineering and Technology.

__________________
The reports of my death are greatly exaggerated.
Register to Reply
Active Contributor

Join Date: Oct 2011
Posts: 20
#9
In reply to #8

Re: Parameters to be considered while selecting panels

02/02/2012 11:57 PM

I m not a member, Then there is no any alternate way to get that Standards? please help me sir.

Register to Reply
Active Contributor

Join Date: Oct 2011
Posts: 20
#10

Re: Parameters to be Considered While Selecting Panels

02/07/2012 12:46 AM

Please some one help me what r the parameters to be consider while designing, where we have to consider reverse current protection, surge protection, over current protection, and many more protections and why?

Register to Reply
Commentator

Join Date: May 2011
Posts: 84
Good Answers: 1
#11
In reply to #10

Re: Parameters to be Considered While Selecting Panels

02/10/2012 7:33 AM

in which company are you working?

Register to Reply
Active Contributor

Join Date: Oct 2011
Posts: 20
#13
In reply to #11

Re: Parameters to be Considered While Selecting Panels

02/29/2012 1:28 AM

I m working in power deign company as a fresher for design. i dont have support of my seniors so i m strugling.

Register to Reply
Active Contributor

Join Date: Oct 2011
Posts: 20
#12
In reply to #10

Re: Parameters to be Considered While Selecting Panels

02/24/2012 11:58 PM

eply here, with

Kind Regards....

Register to Reply
Register to Reply 13 comments
Copy to Clipboard

Users who posted comments:

mannsyed (7); muditmah (1); PWSlack (2); SolarEagle (2); TonyS (1)

Previous in Forum: Electrical Circuit Contact Points & 'Gounding' Switch   Next in Forum: Antipumping

Advertisement