Automotive Technology Blog

Automotive Technology

The Automotive Technology Blog is the place for conversation and discussion about electrical/electronic components, materials, design & assembly, and powertrain systems. Here, you'll find everything from application ideas, to news and industry trends, to hot topics and cutting edge innovations.

Previous in Blog: Not Ready for Prime Time   Next in Blog: 3D Printing Simplifies Production of Spare Parts
Close
Close
Close
3 comments
Rate Comments: Nested

Concept Car Shows Off Future Manufacturing Trends

Posted May 16, 2016 12:00 AM by Engineering360 eNewsletter

Shell has unveiled a concept car that dramatically reduces primary energy use over its entire lifecycle. According to the company, the car would require about half the energy to manufacture and operate than a small family car, and about two thirds less energy than that required for a sports utility vehicle. Built around the Gordon Murray Design iStream platform, the 550 kg (1,212 lb) vehicle is a showcase for recycled carbon fiber and other lightweight materials as well as components made from 3D printing.


Editor's Note: This news brief was brought to you by the Automotive Technology eNewsletter. Subscribe today to have content like this delivered to your inbox.

Reply

Interested in this topic? By joining CR4 you can "subscribe" to
this discussion and receive notification when new comments are added.
Guru

Join Date: Mar 2007
Location: by the beach in Florida
Posts: 33392
Good Answers: 1817
#1

Re: Concept Car Shows Off Future Manufacturing Trends

05/16/2016 4:57 PM

Gee it looks a lot like a Smart Car....

In fact it looks like almost an exact copy, but with a smaller engine, and all plastic parts....

__________________
All living things seek to control their own destiny....this is the purpose of life
Reply
Guru
Hobbies - DIY Welding - Wannabeabettawelda

Join Date: May 2007
Location: Annapolis, Maryland
Posts: 7940
Good Answers: 458
#2
In reply to #1

Re: Concept Car Shows Off Future Manufacturing Trends

05/16/2016 7:21 PM

Or a 1955 Isetta.

Reply
Guru
Engineering Fields - Electrical Engineering - New Member Fans of Old Computers - Commodore 64 - New Member Popular Science - Evolution - New Member United States - Member - New Member

Join Date: Oct 2013
Location: Illinois, 7 county region (The 'blue dot' that drags the rest of the 'red state' around during presidential elections.)
Posts: 3683
Good Answers: 89
#3
In reply to #2

Re: Concept Car Shows Off Future Manufacturing Trends

05/17/2016 10:44 AM

I look at any of these cars, and I have one thing to say: (Well two things, but I only use one snappy comeback at a time)

A) "Where's the rest of it?" or

B) "I'll take two, one for each foot. Do I need a skate key to adjust the fit?"

__________________
( The opinions espressed in this post may not reflect the true opinions of the poster, and may not reflect commonly accepted versions of reality. ) (If you are wondering: yes, I DO hope to live to be as old as my jokes.)
Reply
Reply to Blog Entry 3 comments
Copy to Clipboard

Users who posted comments:

adreasler (1); Brave Sir Robin (1); SolarEagle (1)

Previous in Blog: Not Ready for Prime Time   Next in Blog: 3D Printing Simplifies Production of Spare Parts

Advertisement